Tikkurila Oyj
(Previous date 04.05.2016)

Everal Aqua Matt [10]

Newest generation, universal, waterborne, matt acrylic enamel, with high durability.
Product features
High durability of painted surface:- variable weather conditions and UV rays
- mechanical damage
- high temperature - enamel recommended, among others for radiators
- for washing, detergents, scratches
Attractive final effect:
- anti-yellowing surface

- stable gloss grade over time

- very good covering power

- wide range of over 13 000 colors

Care for health and environment:
- recommendation of Polish Society of Allergy

- neutral smell during application
Time saving and comfort of use:
- quick drying time
- very good spreading and adhesion to the substrate
- the product does not drip and does not splash
Recommended uses
The product is designed for painting interior and exterior wood, chipboard and previously primed metal surfaces, as well as to the surface: steel, galvanized steel, acid-resistant steel, aluminum, copper, plastic, glass, ceramic tiles - after the preparation of the surface. Enamel can also be used for renovation painting of surfaces previously painted with alkyd paints or chemically harden. For the painting of furniture, doors, windows, garden furniture, baseboards, radiators, etc. Not recommended for painting of metal roofs and facades.

The paint is matt The paint is water-borne Tool: roller Tool: spray
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Base paints
A and C
Colour Range
Tikkurila Symphony Colour Card, NCS and RAL. Information about the colors for exterior use is available in the tinting system.
Gloss grade
Up to 14 m2/l per one coat. Actual coverage depend on many factors, such as surface texture, porosity and moisture content of the surface. 
Can sizes
0.45 l; 0.9 l; 2.7 l; 9l
Application method

Brush, roller, spray.

Conditions for air spray:

- pressure: 3-4 bar

- nozzle: 1.4-1.8 mm

- thinning: 20-40% vol.

Conditions for airless spray:

- pressure: 140-160 bar

- nozzle: 0.009”-0.013”

- thinning: 0-5% vol.

Conditions for airless spray with air cover:

- pressure: 80-120 bar

- nozzle: 0.009-0.011

- thinning: 0-5% vol.

- atomization air pressure: 1-2 bar
Drying times
In temperature +23°C, and relative air humidity 50% dust dry after 1, application of next coat after min. 4 hrs. Surface is fully harden after 2-3 days
Weather resistance
Disinfectant resistance
Good, acc. to norm: PN-EN ISO 2812-3:2012.
Heat resistance
Max. +100°C, at higher temperatures the surface has a tendency to yellowing, PN-EN ISO 3248:2001.
Solids volume
Base A approx. 36% vol.
Base C approx. 29% vol.
Base A approx. 1.3 kg/l. Base C approx. 1.04 kg/l.
Storage and transport in tightly closed containers in temperature +5°C – +25°C in dry and ventilated areas. Protect from frost. Product not classified as a dangerous under ADR/RID regulations.

Application conditions
Painted surface must be dry. Painting carried out in temperature from +8°C to +25°C and relative air humidity below 80%. Temperature of painted surface should be min. 3°C higher than the dew point temperature. The producer is not responsible for the poor quality of painting of a breach of its recommendations.
All surfaces should be thoroughly cleaned from dirt, dust and grease. Previously painted surfaces clean with Tikkurila Maalipesu. Rinse cleaned surface thoroughly with water and allow to dry. Remove the flaking pieces of old paint. Smooth and shiny surface should be roughened and thoroughly dusted. If necessary, level the surface with a suitable filler, and after drying sand and remove dust. All substrates painted with primes: Tikkurila Rostex Super Akva, Tikkurila Otex Akva Adhesion Primer and impregnate Tikkurila Valtti Guard must be repainted after 24 hours from application of the last layer.

Wooden surfaces: New, interior wooden surfaces or wooden like surfaces should be primed with Tikkurila Everal Aqua Primer. Absorbent wooden surfaces prime first with primer diluted 5-10%, than sand the surface and if necessary apply coat of undiluted Tikkurila Everal Aqua Primer. Wood surfaces having knots and a tendency to yellowing resulting from the leakage of resin and other substances that cause pigmentation, protect with primer Tikkurila Multistop accordance with the instructions for use, and then apply the finish enamel. Exterior wood surfaces should be primed with Tikkurila Valtti Guard.

Metal surfaces: interior and exterior use surfaces prime with Tikkurila Rostex Super Akva. Enamel can be used without primer for metal surfaces in dry areas that do not require corrosion protection. However, the use of the primer improves adhesion and visual effect of the finish coat.

Others surfaces: aluminum, copper, wood, plastic, glass and ceramic should be roughened and primed with Tikkurila Otex Akva Adhesion Primer before applying the enamel top coat.

Previously painted surfaces: should be wash carefully with special agents to remove all contaminations which will decrease the adhesion of the enamel. Rinse carefully with water and allow to dry. Glossy surfaces must be flattened down. If necessary, level the surface with the help of putty and sanded after drying. Hard and shiny surface should be roughened. Notice: Before the renovation of old coatings should be performed test application that will assess the adhesion of the new paint to the painted surface. Positive result determines the use of the product.
Before painting stir paint thoroughly. Apply 1-2 coats with roller, brush or spray. If necessary dilute the enamel with water up to 5%. It is recommended to use ANZA tools.
Cleaning of tools
Before washing tools should be thoroughly wiped in order to remove as much paint. Clean tools with water immediately after the completion of the work.
EU VOC 2004/42/EC-limit value
Cat. A/d. Acceptable VOC content since 2010r. - 130 g/l.
Cat. A/b. Acceptable VOC content since 2010r. - 100 g/l.
Product contains below 100g/l of VOC

according to Regulation (EC) No. 1272/2008
During application wear protective gloves/clothing. Contains: 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Closed spaces after application of the paint should be ventilated until the odor disappears after this time they are suitable for use.
Safety data sheet

Empty containers and packaging containing residues of paints pass to the point for the collection of this waste. Detailed information on the possibility of collecting waste from your local Municipal Office.
Storage and transport in tightly closed containers in temperature +5°C – +25°C in dry and ventilated areas. Protect from frost. Product not classified as a dangerous under ADR/RID regulations.
NOTICE: : gloss grade can affected by the intensity of the chosen color and the thickness of the surface.