Tikkurila Oyj
PRODUCT DATA SHEET
28.09.2015
 

Fontefacade CC 50 - Acrylate single-coat paint

Description
A water-borne, one-component, fast-drying, acrylate single-coat paint for exterior surfaces.
Product features

Recommended for fast production lines and drying in elevated temperature as well as in room temperature.

The paint can be used as a primer and a topcoat.

Recommended uses
Suitable for exterior mineral substrates such as fibre-cement flat sheets.

TECHNICAL DATA
The paint is semi-gloss The paint is water-borne Tool: spray
The coverage of the paint on rough surfaces
3
m2/l
The coverage of the paint on smooth surfaces
9
m2/l
Features
• Good anti-blocking properties.
• Good weathering resistance.
Base paints
A and C
Colour Range
The shades of the Tikkurila Facade colour card, RAL and NCS colour card for exterior use.
Avatint tinting system.
Gloss grade
Semi-gloss
Coverage

Recommended spreading amounts (unthinned)

Theoretical coverage

dry

wet

final surface

 90–160 µm

150–300 g/m²

3–9 m2/l


Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinner
Water
Application method
Airless spraying and air-assisted airless spraying.
Drying times

170 g/m²

+23ºC

+40ºC

Dry to touch or stack, after

15 min

5 min


Final mechanical properties are achieved after several days. Drying and recoating times are related to the wet film thickness, thinning, color shade, temperature, the relative humidity of the air and ventilation.
Solids volume
43 ± 2 volume %
54 ± 2 weight %
Density
1.2 kg/l
Storage
Must not freeze. The best storage temperature is between +10–+25°C.
Product code
66V-series.

APPLICATION DETAILS
Application conditions
The surface to be treated has to be clean and dry. During application and drying temperature of the air, substrate and paint must be over +10°C and relative humidity of the air below 70%. Good ventilation is also very important.
Preparation
Surfaces must be free of dirt, dust and grease.
Priming
Fontefacade CC 50.
Diluting
Paint is recommended to be used without thinning. If needed thin with water max. 2%. Thinning will slow down drying times.
Application
For airless spraying, recommended nozzle tip is 0.015"–0.019" and pressure 80–160 bar. Spray angle shall be chosen according to the shape of the object.

For air-assisted airless spraying, recommended nozzle tip is 0.015"–0.019" and  pressure 80–160 bar. Atomising air pressure should be about  1–3 bar. Spray angle shall be chosen according to the shape of the object.


Mixing of components
Stir the paint carefully before use.
Cleaning of tools
Water.
EU VOC 2004/42/EC-limit value
According to VOC Directive 2004/42/EU the product subcategory A/c VOC limit (1.1.2010) is maximum 40 g/l. VOC content of "Fonte Facade SC 50" is 30±10 g/l.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008

ENVIRONMENTAL and WASTE DISPOSAL
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj. For industrial use only.
TRANSPORT
-
-