Tikkurila Oyj
PRODUCT DATA SHEET
22.09.2014
 

Liitu Blackboard paint

Description
Waterborne paint for painting blackboards.
Product features

To create blackboard surfaces. Chalk writing adheres well to the painted surface and can be wiped off easily.

Recommended uses
Walls, furniture

TECHNICAL DATA
The paint is suitable for interior walls The paint is matt The paint is water-borne Tool: roller Tool: spray Tool: brush
The coverage of the paint on rough surfaces
8
m2/l
The coverage of the paint on smooth surfaces
10
m2/l
Base paints
A and C
Colour Range
Tikkurila Symphony 2436 colour card. Additionally standard colour Black 202.
Gloss grade
Matt
Coverage
8-10 m2/l.
Can sizes
A and C: 0.225 l and 0.9 l. Black standard color 1/3 l and 1 l.
Thinner
Water
Application method
Roller, brush or spray
Drying time at 23°C and 50% relative air humidity

Recoatable after approx. 6 hours. Ready to use after approx. 1 week

Wet scrub resistance
SFS-EN 13300 class I, ISO 11998
Solids volume
approx. 39 % depending on shade
Density
approx. 1.2 kg/l, depending on shade, ISO 2811
Storage
Protect from frost.
Product code
39V6001-3

APPLICATION DETAILS
Application conditions
The surface to be painted must be dry, the temperature of the air at least +8°C, and the relative humidity of the air below 80 %.
Preparation
Unpainted surface:
Remove dirt and dust from the surfaces. Fill the surfaces with a suitable Presto filler, if needed, and sand the dried surface. Remove sanding dust. Prime wall surfaces with Feelings Universal Primer or Varma Primer and furniture with Feelings Furniture Primer, Helmi Primer or Otex Akva.
Previously painted surface:
Wash down previously painted surfaces with Maalipesu cleaning detergent following instructions on the label. Allow to dry. Sand the surface and remove sanding dust. Fill any holes and cracks with a suitable Presto product. Prime with a suitable product like Feelings Universal Primer, Varma Primer, Feelings Furniture Primer, Helmi Primer or Otex Akva, if needed.
Painting
Stir Liitu well before use. Thin with water, if needed. Apply with a short napped paint roller, brush or spray 1-2 times.
Cleaning of tools
Clean tools with water. Tikkurila Tool Cleaner is recommended for removal of slightly hardened paint.
Maintenance instructions
Cleaning earliest approx. 1 month after painting, if needed: The surfaces are cleaned with a neutral (pH 6-8) dish washing solution and soft brush, sponge or cleaning cloth. Clean very dirty surfaces with weakly alkaline (pH 8-10) detergent using e.g. cleaning cloth or sponge. Rinse the surface carefully.
The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them slightly with a soft brush or damp cleaning cloth.
Maintenance treatment
Surfaces painted with Liitu paint can be recoated directly with Liitu paint. See Preparation.
EU VOC 2004/42/EC-limit value
(cat A/d) 130g/l(2010)
Liitu contains VOC max. 130g/l.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Contains 1,2-benzisothiazol-3(2H)-one and 2,4,7,9-tetramethyldec-5-yne-4,7-diol. May produce an allergic reaction. Wear protective gloves. A Material Safety Data Sheet is available on request.
Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL
Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
TRANSPORT
ADR: not classified
ser250914 / mkv170314 / garta04062014 / akk290914