Full-matt, quick drying special resin based adhesion primer.
pack solvent based adhesion primer suitable
for priming and undercoating both new and previously painted surfaces. Otex
adheres well to difficult substrates like glass, tiles, glass fibre, melamine,
PVC-plastic, aluminium, zinc coated sheet metal and surfaces coated with alkyd
and acid-curing paint. Suitable also for wood, wood fibre board, chipboard and
metal surfaces in dry interior premises.
Interior surfaces that require excellent adhesion and exterior window frames painted with polyurethane or catalytic paints.
Tintable according to the Tikkurila Symphony 2436 colour card. Colour accuracy is not perfect.
AP base paint can be used both as white and tinted (half of A-base paint's colourant amount). C-base only as tinted.
Base paint AP: 0,9 l, 2,7 l, 9 l, 18 l.
Base paint C: 0,9 l, 2,7 l, 9 l
Spray Thinner 1032 and White Spirit 1050
Methods: Brush, roller or spray. For airless spray application use a nozzle 0.011" - 0.015" i.e. 0.280 - 0.380 mm.
Thinning: 0 - 10 vol-%
Drying time at 23°C and 50% relative air humidity
Dust dry after 1 hour, sandable and recoatable on the following day.
1.4 kg/l white, ISO 2811
The surface to be painted must be dry, the temperature of the air at least +5ºC, and the relative humidity of the air below 80 %.
Remove dirt and dust from unpainted surfaces. Treat knot points on bare wooden surfaces with Tikkurila Knotting Lacquer. Wash surfaces requiring special adhesion with Maalipesu cleaning agent and rinse carefully with water. Sand matt. Remove sanding dust.
Previously painted surfaces:
Wash down previously painted surfaces with Maalipesu cleaning agent and rinse carefully with water. Sand the surface matt. Remove sanding dust.
Stir Otex well before use and thin, if necessary, for brush application with White Spirit 1050, and for spray application with Spray thinner 1032. Apply Otex by brush, roller or spray.
Otex adhesion primer levels well, so sanding is often unnecessary. When a very smooth surface is preferred sand with a fine dry sanding paper.
Cleaning of tools
Clean tools with White Spirit 1050 or Tikkurila Pensselipesu (Tool Cleaner).
Handle the surface with care, ultimate durability and hardness is reached in approx. a month under normal circumstances. If cleansing is needed, use a soft brush or a damp cleaning cloth.
Clean the surface at the earliest after 1 month from painting, if necessary.
Use a neutral (pH 6-8) dishwashing agent and a soft brush, sponge or a dust rag.
Soiled surfaces can be cleansed with a cleaning cloth or sponge using a neutral (pH 8-10) detergent. Rinse surface carefully after maintenance.
EU VOC 2004/42/EC-limit value
EU VOC 2004/42/EC-limit value: (cat A/i) 500g/l (2010). Otex contains VOC max. 500g/l.
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Contains: Naphtha, hydrodesulfurized heavy, Solvent naphtha, light aromatic. FLAMMABLE. HARMFUL TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT. Do not breathe vapour/spray. Use only in well-ventilated areas. If swallowed, seek medical advice immediately and show this container or label. Do not empty into drains. Keep out of the reach of children. Contains ethyl methyl ketoxime. May produce an allergic reaction.
A Safety Data Sheet is available on request.
Safety data sheet
ENVIRONMENTAL and WASTE DISPOSAL
Avoid spillage into drains, water systems and soil. Recycle empty cans or dispose them of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations for hazardous waste.
ADR: 3 III, Drums/vessels < 450 litres: not subject to ADR because of high viscosity
sre150312 / kmm160312 / tpi250308 / mpy261005 / 203-s