
PRODUCT DATA SHEET
16.01.2013
16.01.2013
Presto Window Putty
Description
Waterborne, recoatable quick-drying special glazing putty for interior and exterior windows and doors.
Product features
Window glazing and filling of small cracks and crevices on wooden substrates. Also suitable for glass, paint, PVC and zinc-coated steel surfaces.
Also suitable for sealing joints in interior walls and ceilings and filling of small cracks. Can be recoated with Tikkurila interior wall and ceiling paints.
Recommended uses
Interior and exterior window frames. Recoatable with e.g. Unica Akva, Teho Window Paint, Helmi Furniture Paint or Maalarin Valkolakka.
TECHNICAL DATA





Colour Range
Off-white
Coverage
100 g/m
Can sizes
300 ml tube
Thinner
Water
Application method
Application with sealing gun
Drying time at 23°C and 50% relative air humidity
The putty is surface dry after 1-2 hours. Recoatable at the earliest after
8 hours from application. The final curing takes 2-10 days depending on conditions and film thickness.
Density
1.6 kg/l, ISO 2811
Storage
Protect from frost
Product code
001 6569
APPLICATION DETAILS
Application conditions
The surface to be treated must be dry, the temperature at least +5 C, and the relative humidity of the air below 80 %.
Preparation
Remove loose and flaking putty and paint with a scraper from the groove and wood surface. Sand and wire brush the surface clean.
Application
Prime exterior bare wood surfaces of grooves with Valtti Base or Valtti Akvabase. Apply a priming coat of Unica Akva or Teho Window Paint on exterior surfaces and Unica Akva, Helmi Primer, Jehu or Otex on interior surfaces. Cut the tube tip diagonally with a knife big enough to make sure that the putty fills the whole groove with one application. Place the tube in the sealing gun and apply directly from the tube to the groove.
Apply a finishing coat of Unica Akva or Teho Window Paint on exterior surfaces and Unica Akva, Helmi Furniture Paint or Maalarin Valkolakka 2 times on interior surfaces at the earliest 8 hours from the application of putty. The paint must overlap 1-2 mm onto the window glass.
Cleaning of tools
Clean the tools with water and soap
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
according to Regulation (EC) No. 1272/2008
Contains: 2-(2-Heptadec-8-enyl-2-imidazolin-1-yl)ethanol
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Keep out of the reach of children. Do not empty into drains.
A Safety Data Sheet is available on request.
Safety Data Sheet - PRESTO Window Putty
Safety Data Sheet - PRESTO Window Putty
ENVIRONMENTAL and WASTE DISPOSAL
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT
ADR: not classified
-