---

TECHNICAL DATA

Light grey, iron oxide red, green, black.

Matt

Approx. 10  m²/l [40 µm(micrometer) dry film]

1/3 l, 1 l, 3 l, 10 l.

1120

Brush or spray.

Airless spray:
-  Nozzle 0.11”-0.015” or  0.280-0.380 mm
-  Thinning 0-15%

Dry film thickness 50 µm (micrometer)	+10°C	+23°C	+35°C
Dust dry	1 hour	15 minutes	10 minutes
Recoatable with alkyd paints, min.	5 hours	1.5 hours	1 hour
Recoatable with water-borne paints, min.	2 days	1 day	1 day
Recoatable, max.	7 days	4 days	4 days

Resists White Spirit and Methylated Spirit, does not resist strong solvents e.g Thinner

Good

Good

45 %

Approx. 1.3 kg/l, ISO 2811

006_7554

---

The surface to be painted must be dry and warmer than the surrounding air, the temperature of the air at least +5°C, and the relative humidity of the air below 80 %. In these conditions the drying considerably slows down and the recoatable time is extended. The temperature of the surface to be painted may not exceed +40°C, because otherwise the solvent evaporates too quickly and porosity, weakening of adhesion, blistering etc. will occur.

Plan your painting work so that you can finish it within 4 days. When the temperature decreases and/or humidity increases, the recoatability time will get longer. (see the Table)

Unpainted surfaces:
Remove possible white rust/ rust with a scraper and steel brush (to St2 degree) Clean water soluble white rust protective agent, dirt, water soluble salts, oil and grease from unpainted surfaces with Panssaripesu Roof Cleaning Agent and brush. Rinse thoroughly with water and allow to dry. Roughen smooth aluminium surfaces.

New zinc-coated sheet metal roof is recommended to be painted earliest after one winter. Best adhesion is achieved to already faded, mechanically or chemically roughened zinc-coated surface.

Previously painted surfaces:
Remove loose paint and possible rust with a scraper or steel brush (to St2 degree). Smooth the edges between the cleaned surface and the solid paint film. Wash the surface with Panssaripesu Roof Cleaning Agent, rinse thoroughly with water and allow to dry.

Stir the paint well before use. Apply with either brush or spray. The recommended dry-film thickness for single coats is 40-60 µm (micrometer). The finishing coat can be either e.g.water-borne Panssari Akva or solvent-borne Panssarimaali.

Clean tools with Thinner 1120 or with Tikkurila Pensselipesu.

After painting the surfaces must be handled with care, because the paint will achieve its final hardness and durability after 4 weeks under normal conditions. Soon after the treatment the surface can be cleaned lightly with a soft brush, damp cleaning cloth or mop. At the earliest 1 month after painting, dirty surfaces can be cleaned with Tikkurila Huoltopesu (1 part Huoltopesu, 10 parts water). Clean stains and very dirty surfaces with a stronger solution of Huoltopesu (1:1). After washing rinse surfaces and allow to dry.

(cat A/i) 500g/l(2010)

---

Contains: Reaction mass of m-xylene, o-xylene, p-xylene and ethylbenzene. Warning. Flammable liquid and vapor. Causes serious eye irritation. Causes skin irritation. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects. Contains ethyl methyl ketoxime. May produce an allergic reaction. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Avoid breathing vapor. Wear protective gloves/clothing. Use only outdoors or in a well-ventilated area. Keep away from sparks and open flames. - No smoking. Avoid release to the environment. IF IN EYES: Rinse cautiously with water for several minutes. A Safety Data Sheet is available at request.
Safety Data Sheet - Rostex Super

---

ENVIRONMENTAL and WASTE DISPOSAL

Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.

TRANSPORT

VAK/ADR 3 III

---