Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets
M1
 

Supi Lattiaöljy, Floor Oil

Protects wooden floors in humid rooms

Supi Lattiaöljy (Floor Oil) is a waterborne wood oil emulsion based on natural oil derivatives for humid interior spaces. It protects wood from moisture and dirt and reduces the cracking of the wooden surface. Suitable for bare wood or previously oil-treated surfaces in humid premises. Supi Floor Oil is also suitable for thermally modified wood and hardwood.


The paint is suitable for interior floorsThe paint is water-borneTool: brush
The coverage of the paint on rough surfaces
8
m2/l
The coverage of the paint on smooth surfaces
15
m2/l

Eagerly awaited product

The wooden floors and grates in saunas have long lacked a treatment recommendation. Supi Floor Oil produces easy-to-care wooden surfaces in all humid rooms. The product is easy to apply, only one coat is needed, and it dries quickly. Supi Floor Oil can be tinted to all the colours in the Interior Wood Stains and Lacquers colour card.

A safe M1 category product

Supi Lattiaöljy (Floor Oil) is based on natural oil derivatives and contains anti-mould agents to protect surfaces.  Supi sauna products are in the best M1 building material emission class. This means that no harmful substances evaporate from them into the indoor air.


Tikkurila Oyj
PRODUCT DATA SHEET
01.09.2012
 

Supi Lattiaöljy, Floor Oil

Description
Water-borne wood oil based on natural oil derivatives for interior wet room use. Protects wood from moisture and dirt. Also decreases cracking of the wood surface. Building material emission classification M1.
Product features
Suitable for protection of bare wood or previously oiled surface in interior wet rooms. Also suitable for thermally modified and hardwood.
Recommended uses
Wooden floors and duckboards.

TECHNICAL DATA
The paint is suitable for interior floors The paint is water-borne Tool: brush
The coverage of the paint on rough surfaces
8
m2/l
The coverage of the paint on smooth surfaces
15
m2/l
Base paints
EC
Colour Range
Colourless. Tinted according to Interior Wood Stains and Lacquers colour card.
Gloss grade
undefined
Coverage
8-15 m2/l, depending on wood porosity and species.
Can sizes
0.9 l.
Thinner
Water
Application method
Brush or sponge
Drying time at 23°C and 50% relative air humidity

Surface is dry after few hours. Ready to use after approx. 2 days. Porosity and amount of wood oil used affect the drying time.

Solids volume
14 %.
Density
1,0 kg/l, ISO 2811.
Storage
Protect from frost. Once opened, use the oil during the same painting season as the product properties may change in a half empty can.

APPLICATION DETAILS
Application conditions
During painting and drying the temperature of the air, surface and wood oil must be at least +5˚C, and the relative humidity of the air below 80 %.
Preparation
New bare wood surfaces:
Clean wood surface from dirt and dust. Moisten it lightly and after drying sand it with sanding paper no 230 to remove any raised wood fibres. Remove sanding dust.

Surfaces treated previously with wood oil:
Wash down with Supi Sauna Clean according to instructions, rinse carefully and allow to dry. Sand, if necessary and remove sanding dust. Remove loose paint with scraper and/or steel brush. If a visible film remains on the wood surface, remove it before treatment.
Treatment

Mix Supi Floor Oil thoroughly before use and during application.

Apply once with a brush or sponge tightly so that all oil is absorbed evenly into the wood. Wipe off any excess oil after approx. 30 min. Apply evenly in continuous strokes the entire length of board to avoid overlapping. Oil treatment darkens the wood.

Pre-heat the sauna before taking it into use and ventilate well.

Maintenance treatment when needed. Surfaces exposed to continuous moisture stress need retreatment at intervals. 
Cleaning of tools
Wash with soap and water. Tikkurila Tool Cleaner is recommended for removal of slightly hardened wool oil.
Maintenance instructions
Handle new surface with care for approx. 1 week. If needed, the surface can be cleaned lightly with soft brush or mop after approx. 2 days from finishing.

The surface can be cleaned at the earliest after 1 month with Supi Sauna Clean (1-2 dl detergent into 5 liters of water) to allow the product to achieve its final hardness and durability.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request
Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL
Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste. Risk of self-ignition! Cleaning cloths or sanding dust containing the product can create fire by self-ignition. Waste like this should be collected and stored in water before disposal, or dried preferably outdoors or incinerated immediately.
TRANSPORT
ADR not classified
sre040912 / pih010912 / niear060912 / joa010912 / 6190070

Paint calculator

Treated surface area
m
m
Paint coverage, when surface is...
1L =
1L =
Treatment for surface
Number of coats
Product consumption, when surface is...
litres
litres
Error!

Instructions

Consumption varies depending on the surface to be treated and its condition. Absorption is affected e.g. by the surface roughness, moisture content level of timber and porosity. For example, log surface that has been untreated for a long time takes a lot more wood finish than a new surface to be treated.

When calculating the consumption, note that the consumption for round logs is 1.5 times higher than normal. Please also note the corner joints in the surface area.

Rounding up

As the filling rate is usually 90% (space for tinting), it is good to round up the liter amounts and reserve enough of the product so that the work is not interrupted unnecessarily, and colour will be even.