Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets
 

Taika Stardust

A pinch of stardust

Taika Stardust is a waterborne, transparent effect glaze that contains glittering gold or silver particles. It is used on painted surfaces to create a metallic sparkle.

A Stardust coat goes particularly well with velvety matt Harmony interior paint. 


KiiltäväMatta
The paint is suitable for interior wallsThe paint is water-borneTool: rollerTool: brush
The coverage of the paint on rough surfaces
6
m2/l
The coverage of the paint on smooth surfaces
10
m2/l

Sparkle from light

The sparkle of Taika Stardust is most visible in sidelight, under a spotlight, or in strong natural light. Create a space where a glimmer of light reveals a luxurious metallic sheen.

Highlight details

Taika Stardust can be used to treat an entire wall or just to highlight details. It is also ideal for stenciling. We recommend using a small roller or brush with stencils, as the glitter particles will stick to foam plastic tools.

A silver sheen or the richness of gold?

Taika Stardust is a transparent effect glaze. The colour of the interior paint used with the glaze has a major impact on the end result. Is your preference a cool blue wall with a silver glimmer, or perhaps chocolate brown accented with gold? Only creativity sets the limits!



Tikkurila Oyj
PRODUCT DATA SHEET
01.09.2012
 

Taika Stardust

Description
Translucent, full-matt, acrylate based effect glaze.
Product features

To be used for patterning the walls painted with interior paints. As the glaze is translucent, the colour of the underlying coat strongly affects the end result. Good spotlights, sidelight or natural light emphasize the effect.

Recommended uses
Interior walls in residential, office and commercial apartments and similar dry rooms.

TECHNICAL DATA
The paint is suitable for interior walls The paint is full-matt The paint is water-borne Tool: roller Tool: brush
The coverage of the paint on rough surfaces
6
m2/l
The coverage of the paint on smooth surfaces
10
m2/l
Colour Range
Silver and gold, not to be tinted.
Gloss grade
Full-matt
Coverage
6-10 m2/l.
Can sizes
1/3 L, 1 L, 3 L
Thinner
Water
Application method

Roller or brush

Drying time at 23°C and 50% relative air humidity
Re-coatable after approx. 24 hours if needed. The surface is ready to use after approx. 2 days.
Wash resistance
Withstands wiping with a damp cloth.
Heat resistance
+85°C, ISO 4211-3.
Wet scrub resistance
Class I, ISO 11998
Solids volume
Approx. 12%
Density
Approx. 1.0 kg/l, ISO 2811
Storage
Protect from frost.
Product code
0066108/9

APPLICATION DETAILS
Application conditions
The surface to be painted must be dry, the temperature of the air at least +10 °C, and the relative humidity of the air 30-70 %.
Preparation
Unpainted surface:
Remove dirt and dust from new surfaces. Fill the surfaces with a suitable Presto or Prestonit filler, if needed, and sand the dried surface. Remove sanding dust. Prime e.g. with Feelings Universal Primer. Finish with interior paint, e.g. Harmony or Feelings Interior Paint 1-2 times.

Previously painted surface:
Wash down previously painted surfaces with Maalipesu cleaning detergent and rinse carefully with water. Sand hard and glossy surfaces matt. Remove sanding dust. Fill cracks and holes with a suitable Presto filler and sand the dried surface. Remove sanding dust. Finish with interior paint, e.g. Harmony or Feeling Interior Paint to the desired colour.
Finishing
Mix Taika Stardust well before use. Apply the product with a roller or brush in criss-cross strokes. Make sure that the product is applied evenly on the whole area. Overlaps should be faded out as the work progresses. The milkiness will disappear as the surface dries out. A trial application on thick cardboard or another test surface is recommended. Taika Stardust can also be used with stencils applied with a normal small roller or brush. We do not recommend to use tools made of foam.
Cleaning of tools
Remove excess paint from the tools and wash them with water. Tikkurila Pensselipesu is recommended for removal of slightly hardened paint.
Maintenance instructions
The product achieves its final hardness and durability after approx. 1 month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them lightly with a dry or damp cleaning cloth or mop.

At the earliest after approx. 1 month from finishing. The surfaces can be cleaned with dry brush, mop or dust towel. Dirty surfaces are cleaned with a damp cleaning cloth moistened with a neutral detergent (pH 6-8). The surface may not remain wet after cleaning. Follow the dilution instructions of the detergent manufacturer when preparing the detergent solution.
Maintenance treatment
Maintenance:
See instructions from "Previously painted surface". You can also cover the effect surface by painting it with a waterborne wall paint.
EU VOC 2004/42/EC-limit value
(cat A/l) 200g/l(2010)
TAIKA Stardust contains VOC max. 200 g/l.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available at request.
Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL
Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
TRANSPORT
ADR: not classified
sre040912 / joa010912 / niear060912 / pih010912 / 0066108-9

Paint calculator

Treated surface area
m
m
Paint coverage, when surface is...
1L =
1L =
Treatment for surface
Number of coats
Product consumption, when surface is...
litres
litres
Error!

Instructions

Consumption varies depending on the surface to be treated and its condition. Absorption is affected e.g. by the surface roughness, moisture content level of timber and porosity. For example, log surface that has been untreated for a long time takes a lot more wood finish than a new surface to be treated.

When calculating the consumption, note that the consumption for round logs is 1.5 times higher than normal. Please also note the corner joints in the surface area.

Rounding up

As the filling rate is usually 90% (space for tinting), it is good to round up the liter amounts and reserve enough of the product so that the work is not interrupted unnecessarily, and colour will be even.