Tikkurila Everal High Gloss 90
Alkyd gloss for interior and exterior surfaces
High solids gloss with excellent opacity, formulated to provide low sag and drip characteristics.
New and previously painted interior and exterior trims including doors, skirting, windows where a solid solvent high gloss finish is required. Everal high gloss is suitable for use on metal surfaces.
Can be used on interior and exterior surfaces which require a high gloss finish.
Suitable for painting e.g. furniture, windows, fences, ladders, railings, masts, racks and other wood and metal elements.
Decoration and protection
The enamel can be tinted in many attractive colours and it is resistant to mechanical damage.
Everal High Gloss 
High solids gloss with excellent opacity, formulated to provide low sag and drip characteristics.For interior and exterior painting of metal, zinc metal, wood and wooden like surfaces, resistant to mechanical damage.
8-12 m2/l, depending on the type and absorption of the surface.
Wood and wooden like surfaces should be primed before application of enamel with Tikkurila Everal Primer. Exterior surfaces should be primed with Tikkurila Valtti Super Guard (or Valtti Base+). Steel and iron surfaces should be primed with anti-corrosive primer Tikkurila Everal Corrostop and then with enamel as a finish coat.
Previously painted surfaces:
Wood and wooden like surfaces covered with mould, algae etc. should be painted with special agent which will remove microorganisms, then rinse with water and let to dry. Remove all loose, old paint elements and sand the surface, remove dust and degrease. Before the application of enamel surface should be primed with Tikkurila Everal Primer. In case of repainting of the surface in dark colour and in case of application of colours which have a low hiding power, it is recommended to use primer tinted to colour similar to enamel colour. Metal surfaces should be cleaned from rust with metal brush to ST2 clean level according to PN ISO 8501-1. Remove dirt, water-diluted salts, grease and oils with Tikkurila Panssaripesu Cleaning Agent. Rinse with water and let to dry. Old, glossy surfaces should be matt down before painting. Prime unpainted metal surfaces with Tikkurila Everal Corrostop. Zinc surfaces should be sand down and then primed with Tikkurila Everal Metal Primer.
All surfaces painted with primers: Tikkurila Everal Primer, Tikkurila Everal Corrostop, Tikkurila Everal Metal Primer and impregnant Tikkurila Valtti Super Guard, can be painted after 24 hours from application of the last coat.
according to Regulation (EC) No. 1272/2008
Safety data sheet
InstructionsConsumption varies depending on the surface to be treated and its condition. Absorption is affected e.g. by the surface roughness, moisture content level of timber and porosity. For example, log surface that has been untreated for a long time takes a lot more wood finish than a new surface to be treated.
When calculating the consumption, note that the consumption for round logs is 1.5 times higher than normal. Please also note the corner joints in the surface area.