Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets
 

Tunto Fine

A beautiful surface to touch

Tunto Fine is the finest textured coating in the Tunto product range.  You can create individualized effect surfaces and the feel of a finely plastered texture on interior walls. By combining application methods and colors, the possibilities of a Tunto surface are endless. 


KiiltäväMatta
The paint is suitable for interior wallsThe paint is water-borneTool: roller
The coverage of the paint on rough surfaces
1
m2/l
The coverage of the paint on smooth surfaces
1,5
m2/l

A calm surface and the feel of a genuine material

The surface of Tunto Hieno (Fine) is attractively porous and full matt. This makes it ideal for imitating concrete, for example. Use several shades of gray and a steel trowel for application. More detailed instructions can be found in the Tunto guide.

Unlimited application possibilities

The three-dimensional effect of a Tunto surface is created in application. You can shape the surface with a steel trowel, rubber spatula, notched trowel, brush, or broom. You can find examples in the Tunto guide.

Colour and surface in interaction

TThe colour scale of the Tunto products exudes the tranquility of mountain ranges formed over millions of years and the power crystallized in minerals. The Tunto colour card features a magnificent range of earthy colours from subtle to strong.

This is how you succeed with Tunto Fine


Etsi inspiraatiota!



Tikkurila Oyj
PRODUCT DATA SHEET
08.11.2016
(Previous date 29.09.2015)
 

Tunto Hieno - Fine Textured Finish

Description
Water-borne acrylate coating.
Product features
Suitable for new or previously painted concrete, screeded surface, brick, wooden fibreboard, gypsum board or chipboard wall surfaces when a textured coating is desired. TUNTO Fine can also be applied on ceilings.
Recommended uses
Walls and ceilings in dry interiors

TECHNICAL DATA
The paint is suitable for interior walls The paint is full-matt The paint is water-borne Tool: roller
The coverage of the paint on rough surfaces
1
m2/l
The coverage of the paint on smooth surfaces
1,5
m2/l
Base paints
AP and C
Colour Range
Can be tinted to the colours of the TUNTO Colour Card. Lighting conditions and surface structure of the product will contribute to the final colour effect. Product must be premixed before tinting.
Gloss grade
Full-matt
Coverage
1-9m2/l depending on the painting method as follows:
- thick rolling 1-1,5m2/l
- thin rolling 4-5 m2/l
- brushing 2-2,5m2/l
- thick spatula 2-2,5m2/l
- thin spatula 7-9m2/l

Can sizes
2.7 l, 9 l.
Thinner
Water
Application method
Apply with roller and for patterning use e.g. a wide brush, wallpaper knife, firm brush or patterning roller.
Thinning: With water

Drying time at 23°C and 50% relative air humidity
Re-coatable after 24 hours.
Solids volume
Approx. 53 %.
Density
1.0 kg/l, ISO 2811.
Storage
Protect from frost.
Product code
960_7014

APPLICATION DETAILS
Application conditions
The surface to be treated must be dry, and the temperature of the air, surface and coating must be at least +5˚C and the relative humidity of the air below 80 %.
Preparation
Unpainted surfaces:
Clean unpainted surfaces from dirt and dust. If necessary, smooth the surfaces with a suitable Presto Light Filler. Prime with Luja Universal Primer. Apply 1-2 coats of Harmony or Nova 7 tinted to the colour of the final product.

Previously painted surfaces:
Wash down previously painted surfaces with Maalipesu cleaning agent and rinse carefully with water. If necessary, smooth the surfaces with a suitable Presto Filler. Use sandpaper to sand painted glossy surfaces until they are matt and remove the grinding dust. If the colour difference between the substrate and the finish is significant, we recommend to apply one coat of Harmony or Nova 7 tinted to the colour of the final product.
Painting
Stir TUNTO Fine Textured Finish well before use. Use a roller to apply the product. The surface can be patterned e.g. with a wide brush, wallpaper knife, firm brush or patterning roller. Spread the coating in a thick layer on interior walls approximately one m2 at a time and make the final patterning on the surface immediately. Avoid too thick layers because they may cause the dry surface to crack. For a homogeneous surface reserve enough coating mixed in a single container to avoid possible colour difference.
Filling
If plain paintwork or a different kind of structure surface is wanted, level Tunto surface with suitable Tikkurila Presto filler. Continue treatment as in: Preparation Unpainted surfaces.
Cleaning of tools
Clean tools with water or Tikkurila Pensselipesu (Tool Cleaner).
Maintenance instructions
Clean surfaces by dry cleaning with a vacuum cleaner, soft brush or dust towel.

Handle the surfaces with care after the finishing treatment, as the product achieves the final hardness and durability after approx. one month in normal conditions.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous. A Safety Data Sheet is available on request.
Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
TRANSPORT
VAK/ADR: not classified
ser040117 / oa100112 / ktu150607 / mkv281016

Colors

Tunto Textured Finishes colour card

The Tunto product line offers new types of textured finishes which create three-dimensional coloured surfaces. The mineral surface of these textured finishes will bring life to colours depending on illumination. There are two different textured products in the product line: Tunto Fine and Tunto Coarse. Applying Tunto Fine with different kinds of tools will produce a myriad of different effects. Tunto Coarse will give a rougher, more rocky appearance and feeling to the surface.

Paint calculator

Treated surface area
m
m
Paint coverage, when surface is...
1L =
1L =
Treatment for surface
Number of coats
Product consumption, when surface is...
litres
litres
Error!

Instructions

Consumption varies depending on the surface to be treated and its condition. Absorption is affected e.g. by the surface roughness, moisture content level of timber and porosity. For example, log surface that has been untreated for a long time takes a lot more wood finish than a new surface to be treated.

When calculating the consumption, note that the consumption for round logs is 1.5 times higher than normal. Please also note the corner joints in the surface area.

Rounding up

As the filling rate is usually 90% (space for tinting), it is good to round up the liter amounts and reserve enough of the product so that the work is not interrupted unnecessarily, and colour will be even.