Discreet matt and durable
... and you can take it easy for many years to come.
Well done !
Matt surface house paintThe Ultra house paints are the result of Tikkurila’s 150 years of experience and strong investment in product development. Thanks to the binder developed for Tikkurila, the paint film remains flexible even in cold temperatures and conforms to the movements of the wood. Ultra Matt is optimized as a topcoat for the factory-finished ProHouse exterior cladding boards, but is also excellent for factory-primed surfaces or maintenance painting. Ultra Matt has been granted the Finnish Key Flag symbol.
Tikkurila Ultra Matt gives your house an understated matt finish. Its gloss grade corresponds to the gloss of factory-finished ProHouse exterior cladding. Ultra Matt provides your house with state-of-the-art, weather-resistant paint technology.
Water vapour permeability without compromising on moisture protection
Ultra Matt protects wood from water, while allowing water vapor to permeate. As good as freshly painted, even in harsh conditions.
Superior weather resistance with the latest technology
The latest polyacrylate technology used in the binder of the Ultra products provides the paint with superior colour and gloss retention. The hardness and flexibility of the binder is carefully balanced so as to make the paint flexible on the wood without cracking or flaking throughout its service life. The right hardness, in turn, helps to keep the surface clean longer, as dirt is not baked into the surface even in hot summer weather.
(Previous date 19.07.2013)
Ultra Matt - House paint
Ultra Matt is a matt microporous high performance, flexible polyacrylate waterborne paint for wood. Ultra offers the highest level of durability for timber surfaces in the Tikkurila range. Ultra is available in matt, semi-matt and gloss finishes.
For painting of untreated, factory-primed surfaces or surfaces treated earlier with exterior wood surface paints. Also for finishing painting at site according to the Tikkurila ProHouse concept.
-nozzle 0.018" - 0.023" i.e. 0.460 - 0.580 mm
-thinning 0 - 10 vol-%
Remove dirt, mould and loose particles from the surface. Wash down dirty and mouldy surfaces with Tikkurila Mould Removal solution according to the instructions. Prime with Valtti Pohjuste or Valtti Akvabase priming oil in as early construction phase as possible. Protect rusting metal parts like nail heads with Rostex Super anti-corrosion paint. Remove loose resin from knots. Prime surfaces once with Ultra Primer or Öljypohja Oil Primer. Finish with Ultra Matt House Paint 1-2 times. Treat the end grains carefully.
Factory-primed or previously treated surfaces:
Remove dirt, mould and loose particles from the surfaces. Remove loose paint with scraper and brush the surface clean with a steel brush. Wash down dirty and mouldy surfaces with Tikkurila Mould Removal according to the instructions. Treat bare wooden surfaces with Valtti Pohjuste or Valtti Akvabase priming oil and prime them once with Ultra Primer or Öljypohja Oil Primer.
Treat factory-primed surfaces in good condition with Ultra Primer (factory-primed surfaces that have been exposed to weathering over 10 months should be primed with Öljypohja Oil Primer), finish with Ultra Matt House Paint 1-2 times.
Treat surfaces previously painted with oil paint or acrylate paint 1-2 times with Ultra Matt House Paint. If the old surface is worn out, prime the old oil paint surface with Öljypohja Oil Primer, and the old acrylate paint surface with Ultra Primer. Finish with Ultra Matt House Paint.
Industrially with Ultra Pro paint treated surfaces:
Finish unpainted parts like end grains with Ultra Matt House Paint. Any other finishing painting is not required on site, if cladding panels are attached with concealed nailing and the paint surface remains undamaged during transportation, storage or assembling on site.
Patch-up painting may cause differences in gloss grades.
For correcting surface damages occured during construction time and covering nail heads we recommend over-painting of the surface once with Ultra Matt or house paint of Ultra-series.
according to Regulation (EC) No. 1272/2008
Safety data sheet
InstructionsConsumption varies depending on the surface to be treated and its condition. Absorption is affected e.g. by the surface roughness, moisture content level of timber and porosity. For example, log surface that has been untreated for a long time takes a lot more wood finish than a new surface to be treated.
When calculating the consumption, note that the consumption for round logs is 1.5 times higher than normal. Please also note the corner joints in the surface area.