Substrates and Surfaces - Exterior
Painting tin roofs is a simple and easy way to refresh a structure both aesthetically and structurally. Priming and painting correctly will extend the life of the tin significantly. Wash down all with <a href="https://www.tikkurila.co.uk/roof-cleaning...
A common question we get asked by our customers is can you paint UPVC windows and doors? The simple answer is yes. For many homeowners, a quick way of refreshing their home exterior is by adding a new paint colour for that extra curb appeal. Prepare...
Walnut is a straight-grained hardwood that ranges from chocolate brown (when it's from the center of the tree) to yellow (from the outer portion of the tree). A top pick for head-boards, ornate antique-style dining tables, and mantels, walnut is typically...
Assess elevation aspect, take into account direct sunlight, colour choice, drying times. Colour choice will have a direct effect on the thermal dynamic of the timber, Accoya although durable will still bleed resin and tannin, if a dark colour is applied...
Larch is actually one of the hardest softwoods in the world. As a result of its punishing ‘upbringing’ in sub-zero Siberia, larch has plenty of hardness and natural durability. Because of its remarkable natural physical properties and good looks, Siberian...
When painting a garden building or summer house, consideration must be given to the colour being used and the prevalence of knots across the surface. Unfortunately, it is almost impossible to prevent knots bleeding. Instead, it is advisable to take knots...
Tulipwood can be stained very easily and is often used as a low-cost alternative to walnut and cherry in furniture and doors.
Tricoya is an MDF panel that enables simple manufacturing and can be used in the most extreme environments. It is durable and stable enough for outside use. <strong>Preparation</strong> Sand the surface until it is smooth using your sanding block or...
Painting your render can give your masonry a bright, new look. <strong><u>Cleaning & Preparation</u></strong> Clean from all atmospheric, algae, mould contamination using <a href="https://www.tikkurila.co.uk/mould-removal-homeenpoisto.html...
Wash down with Tikkurila roof cleaning agent. Alloys generally have a covering of oil from manufacturing which needs to be removed. Even after exposure to the elements, the oils can persist. It is essential to remove these oils to ensure primers and...
• Asbestos is a carcinogenic silicate material commonly found in old insulation, fire-resistant boards, roofing sheets and ceiling tiles. If found it should be left untouched, appropriate authorities called and should only be disturbed, removed and disposed...
Ash is a light hardwood used externally generally for cladding and weatherboard Clean down as required using <a href="https://www.tikkurila.co.uk/cleaning-agent-maalipesu.html" target="_blank" rel="noopener">Tikkurila Cleaning agent</a> or similar...
Remove any surface contamination. Thoroughly clean down with appropriate method using <a href="https://www.tikkurila.co.uk/mould-removal-homeenpoisto.html" target="_blank" rel="noopener">Valtti Mould Removal Solution</a>. Rinse with clean water. <strong...
Although unusual to paint Bronze, due to its often polished or lacquered finish, it can be very difficult to paint. Please consult our <a href="mailto:enquiries@valtti.co.uk" target="_blank" rel="noopener">technical team</a> for further advice on your...
Easy to paint and cost effective. There are two options open to customers wishing to coat these materials. If a fire classification is required please contact our technical team to discuss. Dust off and ensure boards are clean and free from contamination...
While cedar can be painted, it is not recommended unless it is extremely weathered as it requires heavy preparation and is still prone to failure. It is a highly acidic oily hardwood and is so naturally durable it prevents proper adhesion of paint ...
Painting corrugated iron sheets particularly sheets used in roofing is a simple and easy way to refresh a structure both aesthetically and structurally. Priming and painting correctly will extend the life of the sheets significantly. Wash down ...
Gutters and downpipes are a significant fixed feature on your house and are also one of the most difficult to paint. To make matters worse, if you don’t do the job right, you will probably find that you need to re-paint your gutters and downpipes long...
When painting fencing consideration must be given to the colour being used and the prevalence of knots across the surface. Unfortunately, it is almost impossible to prevent knots bleeding, it is advisable to take knots and resin bleeding into account...
Fibreglass can be tough to paint over as it needs to be suitably prepared and primed for topcoats to properly adhere and stick to the surface. Prepare surfaces by ensuring they are clean and dry, free from anything that can interfere with the application...
- Page Previous
- Page 1
- Page 2
- You're currently reading page 3
- Page 4
- Page Next