Temabond ST300 is a two-component high-solids, modified tintable epoxy maintenance paint for demanding surfaces.
Surface-Tolerant High-Solids Tintable Epoxy Paint
Temabond ST 300 is an ideal solution for maintenance painting due to its very good adhesion even to hand-prepared steel. As a high-solids product, the paint has lower VOC emissions than conventional epoxy paints.
Suitable for Immersion
Temabond ST 300 withstands immersion in water and can therefore be used e.g. on steel structures immersed in water or buried in soil. The product can also be used for painting hydro-power stations. As a CE-marked product, Temabond ST 300 is suitable for concrete surfaces.
Good Chemical and Abrasion Resistance
The tintable Temabond ST 300 forms a very tight film with good chemical and abrasion resistance. The product is used for repainting and touch-up painting steel surfaces that are difficult to clean, such as bridges, cisterns and different types of steelwork and equipment in the wood-processing and chemical industries.
Functional Mechanism of Temabond ST 300
Temabond ST 300 mastic paint has the ability to penetrate rust and adhere to the underlying steel surface, effectively preventing further corrosion.
|For Interior or Exterior Use||Interior, Exterior|
|Product Category||Topcoat, Primer/Priming, Other|
|Sheen Level||Gloss (61-80%)|
|Application Method||Airless, Brush|
|Theoretical Cover Rate||Theoretical coverage 8/litre @ 100um|
|Hardener 1||008 5600 (DEFAULT)|
|Hardener 2||008 5605 (FAST)|
|Touch Dry||3 hours @ 23 °C|
|Waterbased or Solventbased||Solvent|
|Recoat Time||8 hours @ 23 °C|
|Minimum content||Minimum contents are the can size less 10%|
|Single Pack or 2 pack||2 Pack|
|Product Solutions||Energy & Telecommunication infrastructure, Harbour Infrastructure|