Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets
 

Supi Saunapesu Cleaning Agent

A clean sauna – efficiently

Supi Saunapesu is an effective but gentle cleaning agent. It bleaches wooden surfaces and dissolves lime scale deposits from tile surfaces. Supi Saunapesu is suitable for cleaning wooden, metal and tile surfaces in saunas and other humid rooms.



The paint is water-borne

Gentle cleaning agent

It is essential to always clean surfaces in an appropriate manner before finishing. In saunas, the most appropriate product for this is Supi Saunapesu, the cleaning agent in the Supi product range. Unlike most cleaning agents, it is acidic. It bleaches without chlorine and effectively removes limescale deposits. 

A safe M1 category product

Supi sauna products are in the best M1 building material emission class. This means that no harmful substances evaporate from them into the indoor air.


Tikkurila Oyj
PRODUCT DATA SHEET
13.10.2015
(Previous date 07.03.2012)
 

Supi Saunapesu Cleaning Agent

Description
SUPI Saunapesu is an acidic cleaning agent which bleaches and dissolves lime scale deposits in saunas and other humid rooms.
Product features

For saunas and other humid rooms.  Gentle and thus non-corrosive. However, care should be taken when cleaning tile joints with concentrated and strong solutions. Do not use together with products containing chlorine.

Recommended uses
For saunas and other humid rooms.

TECHNICAL DATA
The paint is water-borne
Can sizes
0.5 l, 1 l.
Thinner
Water
Mixing ratio
Depending on the degree of contamination, add 1 to 2 dl of Supi Saunapesu to 5 litres of water.
pH value of ready-to-use solution: approx. 2
Application method
Brush or sponge.
Density
1.03 kg/l, ISO 2811
Storage
Protect from frost.
Product code
001_7099

APPLICATION DETAILS
Application conditions
The temperature of the air should be at least +5 ºC, and the relative humidity of the air below 80 %.
Cleaning
Dosage: Depending on the degree of contamination, add 1 to 2 dl of Supi saunapesu to 5 litres of water. Dissolving of lime: Use a 10-15% solution. Supi Saunapesu can be used unthinned on persistent lime scale deposits and dirt stains. Bleaching of sauna benches: Mix equal amounts of SUPI Saunapesu and water (1:1), and allow to act for approx. 15 minutes. Note! Always rinse the surface with clean water after treatment.
Cleaning of tools
Clean with water.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
Corrosive
Corrosive
Corrosive, C Contains: Phosphoric acid < 5 % CAUSES SEVERE BURNS. Wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Take off immediately all contaminated clothing. Do not breathe vapour. Use only in well-ventilated areas. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Keep locked up and out of the reach of children. Contains < 5 % non-ionic surfactants, < 5 % cationic surfactants and < 5 % perfumes. Safety Data Sheet is available on request.
Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL
Avoid spillage into drains, water systems and soil. Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations for hazardous waste.
TRANSPORT
VAK/ADR 8 III
sre191015 / kmm280512 / lko141106 / / tho031106 / 0017099