Working instructions
Product data sheet
Paint calculator
Safety Data Sheets

Ultra Lux

When only the best will do

Ultra Lux is the result of Tikkurila’s 150 years of experience and strong investment in product development. You will find an alternative in the environmentally friendly Ultra product family for both primed and factory-primed surfaces as well as maintenance painting. Ultra Lux has been granted the Finnish Key Flag symbol.

The paint is suitable for exterior wallsThe paint is water-borneTool: sprayTool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces

Glossy and dirt-repellent surface

Ultra Lux produces a modern, glossy finish that resembles fresh oil paint. The glossy surface is easy to keep clean over time.

Water vapour permeability without compromising on moisture protection

Ultra Lux protects wood from water, while allowing water vapour to permeate. As good as freshly painted, even in harsh conditions.

Modern, weather-resistant paint technology for your house.

The latest polyacrylate technology designed for Tikkurila and the Ultra products provides the paint with superior color and gloss retention. The hardness and flexibility of the binder is carefully balanced so as to make the paint flexible on the wood without cracking or flaking throughout its service life. The right hardness, in turn, helps to keep the surface clean longer, as dirt is not baked into the surface even in hot summer weather. Excellent weather resistance with Ultra Lux!

Tikkurila Oyj
(Previous date 02.07.2013)

Ultra Lux - House paint

Waterborne high performance opaque gloss wood finish.
Product features

Ultra Lux is a gloss microporous high performance, flexible polyacrylate waterborne paint for wood. Ultra offers the highest level of durability for timber surfaces in the Tikkurila range. Ultra is available in matt, semi-matt and gloss finishes.

For the painting of untreated, factory-primed surfaces or surfaces treated earlier with exterior wood surface paints. Also for finishing painting at site according to Tikkurila ProHouse concept.
Recommended uses
Wooden exterior cladding , weatherboards etc.

The paint is suitable for exterior walls The paint is glossy The paint is water-borne Tool: spray Tool: brush
The coverage of the paint on rough surfaces
The coverage of the paint on smooth surfaces
Base paints
A and C
Colour Range
Tikkurila color card for Wooden Facades
Gloss grade
Sawn wood surfaces 4 - 6 m2/l. Planed and previously painted surfaces 7 - 9 m2/l.

Can sizes
0.9 l, 2.7 l, 9 l and 18 l
Application method
Spray, roller or brush.
Airless spray
-nozzle 0.018" - 0.023" i.e. 0.460 - 0.580 mm
-thinning 0 - 10 vol-%

Drying time at 23°C and 50% relative air humidity
Touch-dry after one hour. Next coat can be applied after 2 - 4 hours under normal conditions. At lower temperatures and during damp weather the drying time is longer.
Weather resistance
Good, also in industrial atmosphere.
Solids volume
Approx. 41%.
Approx. 1.3 kg/l, ISO 2811
Protect from frost. Close the can tightly for futher use.
Product code

Application conditions
The surface to be painted must be dry, the temperature of air must be at least +5 °C and the relative humidity of air below 80 % during the application and drying.
New unpainted surfaces:
Remove dirt, mould and loose particles from the surface. Wash down dirty and mouldy surfaces with Tikkurila Mould Removal solution according to the instructions. Prime with Valtti Pohjuste or Valtti Akvabase priming oil in as early construction phase as possible. Protect rusting metal parts like nail heads with Rostex Super anti-corrosion paint. Remove loose resin from knots. Prime surfaces once with Ultra Primer or Öljypohja Oil Primer. Finish with Ultra Lux House Paint 1-2 times. Treat the end grains carefully.
Factory- primed and previously treated surfaces:
Remove dirt, mould and loose particles from the surfaces. Remove loose paint with scraper and brush the surface clean with a steel brush. Wash down dirty and mouldy surfaces with Tikkurila Mould Removal according to the instructions. Treat bare wooden surfaces with Valtti Pohjuste or Valtti Akvabase priming oil and prime them once with Ultra Primer or Öljypohja Oil Primer.
Treat factory-primed surfaces in good condition with Ultra Primer (factory-primed surfaces that have been exposed to weathering over 10 months should be treated with Öljypohja Oil Primer), then finish with Ultra Lux House Paint 1-2 times.
Treat surfaces previously painted with oil paint or acrylate paint 1-2 times with Ultra Lux House Paint. If the old surface is worn out, prime the old oil paint surface with Öljypohja Oil Primer, and the old acrylate paint surface with Ultra Primer. Finish with Ultra Lux House Paint.
Stir the paint well before use and thin with water if necessary. Apply by brush or airless spray. Apply carefully on end-grain. Make sure you have enough paint stirred in one can for one uniform surface to avoid colour differences. There is resin and other coloring extractives in the wood, particularly in knots. They may cause discoloration or seepage of resin through the paint surface as a result of temperature and humidity fluctuations. Use of primer (Öljypohja or Ultra Primer) reduces the seepage through the paint film. Varying roughness of wood surface can give an appearance of uneven gloss.
Cleaning of tools
Clean tools with water. To remove hardened paint, Tikkurila Pensselipesu (Tikkurila Tool Cleaner) is recommended.
Maintenance instructions
Handle the surface with care, ultimate durability and hardness is reached in approx. 4 weeks under normal circumstances. After treatment, the surface can be cleaned with a soft brush, a damp cleaning cloth or a mop.
Earliest after 1 month from painting a soiled surface can be cleaned with Huoltopesu (1 part of Huoltopesu to 10 parts of water). Clean stains and very dirty surfaces with a stronger Huoltopesu solution (1:1). Rinse well and allow to dry.
Maintenance treatment
Maintenance painting: Ultra Lux can be re-painted with the house paints of Ultra serie or with Pika-Teho House Paint.
EU VOC 2004/42/EC-limit value
(cat A/d) 130g/l(2010); Ultra Classic contains VOC max. 130g/l

according to Regulation (EC) No. 1272/2008
Irritant, Xi Contains: 2-Octyl-2h-isothiazol-3-one, 4,5-dichloro-2-octyl-2H-isothiazol-3-one. MAY CAUSE SENSITIZATION BY SKIN CONTACT. Do not breathe spray. Use only in well-ventilated areas. Avoid contact with skin. Wear suitable protective gloves. If swallowed, seek medical advice immeadiately and show this container or label. Do not empty into drains. Keep out of the reach of children. A Safety Data Sheet is available on request.
Safety data sheet

Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste.
ADR: not classified
sre270315 / jha010611 / akk120312 / hsa29122011 / 697-


Exterior wood colour card

Tikkurila Wooden Facades colour card consists of 120 colours suitable for outdoor use. You can dramatically change the appearance of your house by changing the colours.

Paint calculator

Treated surface area
Paint coverage, when surface is...
1L =
1L =
Treatment for surface
Number of coats
Product consumption, when surface is...


Consumption varies depending on the surface to be treated and its condition. Absorption is affected e.g. by the surface roughness, moisture content level of timber and porosity. For example, log surface that has been untreated for a long time takes a lot more wood finish than a new surface to be treated.

When calculating the consumption, note that the consumption for round logs is 1.5 times higher than normal. Please also note the corner joints in the surface area.

Rounding up

As the filling rate is usually 90% (space for tinting), it is good to round up the liter amounts and reserve enough of the product so that the work is not interrupted unnecessarily, and colour will be even.