Introduction
Systems
Working instructions
Product data sheet
Colors
Paint calculator
Safety Data Sheets
 

Valtti Furniture and Decking Oil

Pre coloured wood oil

An easy and durable choice for oiling terraces, jetties and wooden furniture. The oil is absorbed readily into the wood.



The paint is solvent-borneTool: sprayTool: brush
The coverage of the paint on rough surfaces
5
m2/l
The coverage of the paint on smooth surfaces
15
m2/l

Freshens up old surfaces

Available in pre-mixed grey, black or brown, the oil slows down the degrading effects of sunlight.

Keeps wood in condition

Wood oil is very easily applied and requires very little preparation prior to re oiling, just brush on a coat whenever your timber starts to look tired.

As good as new

An old, soiled wood surface darkened over time can be treated simply and easily with Valtti Furniture and Decking Oil Black. The deep and even colour, with no dark stains, will dramatically change the appearance of the wood and make it look visibly newer.


Tikkurila Oyj
PRODUCT DATA SHEET
04.05.2016
(Previous date 01.01.2012)
 

Valtti Furniture and Decking Oil Brown, Grey and Black

Description
Solvent-borne ready-to-use colored wood oil containing wax, for outdoor use.
Product features
Suitable for surface oil treatment and colouring hardwoods brown for outdoor use. Also suitable for thermowood, impregnated and untreated wood, as well as wood previously treated with oil. The final colour of the surface will depend on the original wood colour. Grey oil works best on pale, neutral coloured substrate. Already grey and soft wood soaks up oil and the end result will be dark. Always test before application.
Recommended uses
Terraces, garden furniture, jetties, stairs

TECHNICAL DATA
The paint is solvent-borne Tool: spray Tool: brush
The coverage of the paint on rough surfaces
5
m2/l
The coverage of the paint on smooth surfaces
15
m2/l
Colour Range
Brown, grey and black
Gloss grade
undefined
Coverage

5-7 m2/l on old and worn wood surface

7-15 m2/l on new surface or wood surface in good condition

Can sizes
0.9 l, 2.7 l and 9 l
Thinner
White Spirit 1050
Application method
Brush, spraying or sponge.
Drying time at 23°C and 50% relative air humidity
Surface dries in several hours, depending on the porosity of the surface and the amount of oil used. Apply the second coat as soon as the surface is dry.
Weather resistance
Carry out maintenance if necessary. Surfaces continuously exposed to the weather may need to be treated annually.
Solids volume
25%
Density
0.9 kg/l, ISO 2811
Storage
Unaffected by cold storage. Badly closed or short cans and/or tinted products do not withstand long storage.
Product code
005_0428-0430

APPLICATION DETAILS
Application conditions
The surface to be treated must be dry and relative wood moisture content less than 20 %, as damp wood will not absorb oil, which dries slowly. As impregnated wood is often damp, we recommend treatment after a 6-month drying period.
The surface to be painted, the paint and the air temperature must be at least +5°C, and relative humidity below 80% during painting and drying
Preparation
Untreated surfaces:
Remove all dirt, dust and loose material from the surface. Wash off mould with Homeenpoisto (Mould Removal) or Tehopesu (Super Clean) according to instructions.
Surfaces previously treated with wood oil:
Remove loose material from the surfaces with a scraper or wire brush. Clean and wash if necessary with Homeenpoisto (Mould Removal) or Tehopesu (Super Clean) according to instructions. If a clear film remains on the surface, remove it before treatment. Allow the surface to dry, as moist wood does not absorb oil, which dries slowly in damp conditions.
Treatment
Stir Valtti Furniture and Decking Oil thoroughly before and frequently during use. Apply one coat of oil tightly by brush, spray or sponge so that all the oil is absorbed into the wood. Wipe off eventual excessive oil. To avoid overlapping, apply two thin coats of oil in continuous strokes to cover the whole surface evenly. One application is usually enough for exterior furniture. Porous wood may need two coats. When treating jetties take care that the oil does not end up in the water.

Apply the second coat as soon as the surface is dry, after some hours depending on the weather. Every oil treatment will make the wood colour darker.
Cleaning of tools
White Spirit 1050 or Tikkurila Pensselipesu (Tool Cleaner).
Maintenance treatment
For maintenance treatment you can also use colourless Valtti Woodoil if you wish the surface not to be darker. Carry out maintenance if necessary. Surfaces continuously exposed to the weather may need to be treated annually.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
GHS02
GHS02
GHS08
GHS08
GHS07
GHS07
Contains: Hydrocarbons, C9-C11, n-alkanes,isoalkanes,cyclics,<2% aromatics Danger. Flammable liquid and vapor. May be fatal if swallowed and enters airways. May cause drowsiness and dizziness. Harmful to aquatic life with long lasting effects. Contains 3-iodo-2-propynyl butylcarbamate and ethyl methyl ketoxime. May produce an allergic reaction. Wear protective gloves. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Avoid breathing vapor. Use only outdoors or in a well-ventilated area. Keep away from sparks and open flames. - No smoking. IF SWALLOWED: Immediately call a POISON CENTER or physician. Do NOT induce vomiting. Avoid release to the environment. A Material Safety Data Sheet is available at request
Safety data sheet

ENVIRONMENTAL and WASTE DISPOSAL
Avoid spillage into drains, water systems and soil. Recycle empty, dry cans or dispose them of in accordance with local regulations. Destroy liquid waste according to the local regulations for hazardous waste. NOTE! Cleaning cloths or sanding dust containing the product can create fire by auto-ignition and should be stored in water before disposal, or be dried outdoors or incinerated immediately.
TRANSPORT
VAK/ADR 3 III
sre130516 / ivk16062011 / hsa29042016 / akk180516 / 005 0428, 005 0429, 005 040

Paint calculator

Treated surface area
m
m
Paint coverage, when surface is...
1L =
1L =
Treatment for surface
Number of coats
Product consumption, when surface is...
litres
litres
Error!

Instructions

Consumption varies depending on the surface to be treated and its condition. Absorption is affected e.g. by the surface roughness, moisture content level of timber and porosity. For example, log surface that has been untreated for a long time takes a lot more wood finish than a new surface to be treated.

When calculating the consumption, note that the consumption for round logs is 1.5 times higher than normal. Please also note the corner joints in the surface area.

Rounding up

As the filling rate is usually 90% (space for tinting), it is good to round up the liter amounts and reserve enough of the product so that the work is not interrupted unnecessarily, and colour will be even.