Can be Used Directly on Metal
Due to its anti-corrosion pigmentation, Temadur 10 can be used as a single-coat paint for steel, zinc and aluminium surfaces. The paint is also used as a primer or a matt topcoat in epoxy systems.
Metallic Colours in Matt Versions
Temadur 10 provides an almost unlimited range of colours, including metallic effects.
Temadur 10 has a MED certificate and is thus accepted for painting interior ship surfaces.
Temadur, which is a two-component polyurethane paint, has a good resistance to weather and abrasion and it is suitable for painting most of the common plastics.
Below you can find a table on the suitability of Temadur to different kind of plastics. Temadur's suitability to other variety of plastics should be examined case by case.
Polyethene (PE) - not usually suitable
Polypropylene (PP) - not usually suitable
Polystyrene (PS) - suitable in some cases
ABS - suits well
PMMA - suits well
Polycarbonate (PC) - suitable in some cases
PPO - suitable in some cases
Polyamide (PA) - suits well
Polyvinylchloride (PVC) - suits well
Fibre reinforced polyester (GUP) - suits well
Polyurethane (PUR) - suits well
Rubber - suitable in some cases
PVDF - not usually suitable
Quantity per '10 LTR' unit is less than that of Temadur 20, 50 and 90 which is reflected in the price. Minimum content in Temadur 10 is 8 litres before tinting.
|For Interior or Exterior Use||Interior, Exterior|
|Surface||Metal, Galvanised Steel, Cladding, UPVC, Powder Coated Surfaces|
|Product Category||Topcoat, Primer/Priming|
|Sheen Level||Matt (6-10%)|
|Application Method||Airless, Spray, Brush|
|Theoretical Cover Rate||Theoretical coverage 14m/litre @ 40um|
|Hardener 1||008 7590 0010|
|Touch Dry||3 hours @ 23 °C|
|Waterbased or Solventbased||Solvent|
|Recoat Time||6 hours @ 23 °C|
|Minimum content||Minimum contents are the can size less 10%|
|Single Pack or 2 pack||2 Pack|
|Product Solutions||Energy & Telecommunication infrastructure, Harbour Infrastructure, OEM/ACE, Repair and Maintenance|