Temadur 50 is a two-component, semi-gloss polyurethane paint
Temadur 50 is a time-proven, easy-to-use general purpose topcoat for constructional steelwork and machinery. The paint has a wide spectrum of colours, including metallic effects.
Good Weather and Abrasion Resistance
Temadur 50 forms a durable, easy-to-clean and non-chalking topcoat with good gloss and colour retention. The paint has also been approved for use on top of intumescent coatings.
Temadur 50 has a MED certificate and is thus accepted for painting interior ship surfaces.
Temadur, which is a two-component polyurethane paint, has a good resistance to weather and abrasion and it is suitable for painting most of the common plastics.
Below you can find a table on the suitability of Temadur to different kind of plastics. Temadur's suitability to other variety of plastics should be examined case by case.
Polyethene (PE) - not usually suitable
Polypropylene (PP) - not usually suitable
Polystyrene (PS) - suitable in some cases
ABS - suits well
PMMA - suits well
Polycarbonate (PC) - suitable in some cases
PPO - suitable in some cases
Polyamide (PA) - suits well
Polyvinylchloride (PVC) - suits well
Fibre reinforced polyester (GUP) - suits well
Polyurethane (PUR) - suits well
Rubber - suitable in some cases
PVDF - not usually suitable
|For Interior or Exterior Use||Exterior|
|Surface||Metal, Cladding, Powder Coated Surfaces|
|Sheen Level||Semi Gloss (36-60%)|
|Application Method||Airless, Spray, Brush|
|Theoretical Cover Rate||Theoretical coverage 14m/litre @ 40um|
|Hardener 1||008 7590|
|Touch Dry||4 hours @ 23 °C|
|Waterbased or Solventbased||Solvent|
|Recoat Time||6 hours @ 23 °C|
|Minimum content||Minimum contents are the can size less 10%|
|Single Pack or 2 pack||2 Pack|
|Product Solutions||Energy & Telecommunication infrastructure, Harbour Infrastructure, OEM/ACE, Repair and Maintenance|